+ Reply to Thread
Results 1 to 3 of 3

Thread: XMC4700 error while configuring multiple slaves in DAVE

  1. #1
    New Member New Member bhanabh is on a distinguished road
    Join Date
    Jul 2021
    Posts
    2
    Points
    35

    XMC4700 error while configuring multiple slaves in DAVE

    Hi,

    I am trying to map 6 slaves to a single SPI master in DAVE. It gives me an error saying "DAVE is unable to grant your last hardware resources request".

    I have referred to Universal Serial Interface Channel (USIC) AP3230332303 note and it clearly shows that 8 slave selects are available.

    I do not want to daisy chain the slaves. Is there a certain way to configure 6 slave selects in DAVE?

    Thanks in advance for the help.

    Regards,
    Abhijeet

  2. #2
    Moderator
    Infineon Employee
    Infineon Employee
    Vasanth is on a distinguished road
    Join Date
    Nov 2020
    Posts
    118
    Hi Abhijeet,

    I guess the issue is same as in this thread. https://www.infineonforums.com/threa...-lines-for-SPI
    Kindly check the referene manual of the device and see all the pins are routed. Also make sure that you are using the USIC blocks with all lines are routed to pins.

    Best Regards,
    Vasanth

  3. #3
    New Member New Member bhanabh is on a distinguished road
    Join Date
    Jul 2021
    Posts
    2
    Points
    35
    Thanks Vasanth for pointing to the original thread. So unless I select a specific peripheral that allows multiple chip selects, what I want can't be done.
    In this case, if I don't want to use HW controlled SPI (half duplex), can I use GPIOs for chip select? I want to do the arrangement shown in the attached image. Is this possible with not using dedicated chip select pins and by using GPIO pins?
    Click image for larger version

Name:	SPI_Multi_Slaves.png
Views:	0
Size:	43.2 KB
ID:	5834

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.