Jun 29, 2021
08:57 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 29, 2021
08:57 AM
I am working with a TC377 Aurix microcontroller. I want to use the MCS processor core within the GTM to access some timer registers within the same cluster of the GTM using the AEI bus master interface.
The Aurix manual from Infineon says:
The GTM-IP manual from Bosch says:
I can't find any information about addressing of the MCS bus master in the Infineon appendix for the TC377, and I can't find the Bosch GTM 3.1.5.1 Appendix B at all.
Can anyone tell me where I can find the address map for the MCS AEI Bus master within the GTM.
At the moment I am having to use a debugger to poke test values into the registers I want to use and then set the MCS searching for those values on its AEI bus.
The Aurix manual from Infineon says:
The GTM-IP manual from Bosch says:
I can't find any information about addressing of the MCS bus master in the Infineon appendix for the TC377, and I can't find the Bosch GTM 3.1.5.1 Appendix B at all.
Can anyone tell me where I can find the address map for the MCS AEI Bus master within the GTM.
At the moment I am having to use a debugger to poke test values into the registers I want to use and then set the MCS searching for those values on its AEI bus.
1 Reply
Jun 30, 2021
09:20 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 30, 2021
09:20 AM
Found it now, with some help.
It's in the GTM Implementation section of Volume 2 of the TC3XX User Manual. Chapter 28.25.24.
It's in the GTM Implementation section of Volume 2 of the TC3XX User Manual. Chapter 28.25.24.