+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: XMC4700 UART problem

  1. #11
    Intermediate Intermediate Aashita_Raj is on a distinguished road Aashita_Raj's Avatar
    Join Date
    May 2021
    Posts
    11
    Points
    260
    Hi @TimFlynn,

    Apologies for the late response. We went through your attached project. Since you mentioned about your prior version and the FIFOs size set to 16 for RX and TX, can you please let us know if your tried to use a single USIC channel block with the size of TX and RX FIFO set to 32 before this?
    If yes, what were your possible observations ? Was it failing in that case as well ?

    Also, can you please export the project and share? You can follow this ->File ->Export ->Infineon -> DAVE Project. I am mentioning this because I am facing difficulty in fetching some information
    regarding the project.

    Best Regards,
    Aashita

  2. #12
    Beginner Beginner TimFlynn is on a distinguished road
    Join Date
    Jun 2016
    Posts
    83
    Points
    470.68359375
    Hi ErnieT,

    UARTs setup by Dave Apps. Running at 416Kbaud. So running without FIFOs would be a problem. I'm quite sure its not a overlap problem.
    The problem would appear when the read & write FIFO activity was about the same time.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.