Is it possible to use IN_SET-OUT_SET for PWM dimming in LITIX Basic+?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User20729
Level 1
Level 1
5 questions asked First question asked
When the OUT_SET is used to set the current on a second Basic+ driver, can we apply PWM via the IN_SET pin of the first one? Will the PWM be applied on the second driver as well?
0 Likes
1 Solution
V_Makantasi
Employee
Employee
50 sign-ins 25 sign-ins 5 questions asked
Yes, PWM via IN_SET is possible and will be applied on both drivers. The PWM on IN_SET is mirrored on the OUTSET pin. So, any change on the IN_SET current of the first driver will be mirrored on the second one.
For more information please check the LITIX™ Basic+ webpage.

View solution in original post

1 Reply
V_Makantasi
Employee
Employee
50 sign-ins 25 sign-ins 5 questions asked
Yes, PWM via IN_SET is possible and will be applied on both drivers. The PWM on IN_SET is mirrored on the OUTSET pin. So, any change on the IN_SET current of the first driver will be mirrored on the second one.
For more information please check the LITIX™ Basic+ webpage.