TLE9879 Connectors

Announcements

Webinar: Integrated solutions for smaller, simpler low-voltage motor control design.
Join the webinar to experience!

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User21907
Level 1
Level 1
Hi all,
I just received my BLDC Shield TLE9879, and I'm wondering what is the easiest way to connect power, phases, and hall sensors?
I can simply solder the power & phases wires to the screw mounts, but if there's a more "clean" way of connecting it, I'd prefer that.
Regarding the hall sensors, I thought of using socket headers on the hall sensors wires coming out of the motor.

What do you guys think?

Regards,
Shay
0 Likes
2 Replies
Fiz
Moderator
Moderator
Moderator
First like received 50 replies posted 25 replies posted
Hi Shay,

great to hear, that you are using our BLDC shield!
Soldering the wires zo VBAT and GND is the best way to go. You could also use crocodile clamps.
For hall sensors, you can connect the cables from the motor to the socket headers.
What kind of motor are you using in your project?

Best,
Fiz
0 Likes
User21907
Level 1
Level 1
Fiz wrote:
Hi Shay,

great to hear, that you are using our BLDC shield!
Soldering the wires zo VBAT and GND is the best way to go. You could also use crocodile clamps.
For hall sensors, you can connect the cables from the motor to the socket headers.
What kind of motor are you using in your project?

Best,
Fiz


Hi Fiz,
Thank you for the quick response.
I'm using QBL4208-41-04-006 by Trinamic.
0 Likes