EVAL-M1-101T(IMC101T-T038) UART TO start motor

Announcements

From sunburn to sun earn – we’ve got the power! Watch our #poweringgreen videos now.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User20544
Level 1
Level 1
First question asked
Hi,

I am trying for UART communication with IMC101T-T038 to start the motor. But i cannot connect start the motor.

1) I can start/stop the motor with Infineon MCEdesigner.

2)As i read in forum that by editing .txt parameter exported from Infineon MCEwizard.
edited Interfacecong0 to 1,
systaskconfig to 58,
UART0_Baudrate tried with 15200 & also 9609.

3) Tried to load it to the IMC101T-T038, always end with the following errors.

5146.attach

5147.attach

4) I have attemped with those 4sec count.

5) i request some1 counld spot a light to overcome this problem.

Thank you
0 Likes
1 Reply
snget2
Moderator
Moderator
Moderator
5 sign-ins First like received 25 replies posted
Hello Vinay6217,
There is no need to mess with txt file manually, Use MCEWizard to enable user uart protocol. Refer to SRM UART. Index, 2.3.

https://www.infineon.com/dgdl/Infineon-MCESW-RM-UserManual-v01_03-EN.pdf?fileId=5546d462719b59230171...

Sid
0 Likes