+ Reply to Thread
Results 1 to 2 of 2

Thread: EVAL-M1-101T(IMC101T-T038) UART TO start motor

  1. #1
    Beginner Beginner vinay6217 is on a distinguished road
    Join Date
    Nov 2020

    EVAL-M1-101T(IMC101T-T038) UART TO start motor


    I am trying for UART communication with IMC101T-T038 to start the motor. But i cannot connect start the motor.

    1) I can start/stop the motor with Infineon MCEdesigner.

    2)As i read in forum that by editing .txt parameter exported from Infineon MCEwizard.
    edited Interfacecong0 to 1,
    systaskconfig to 58,
    UART0_Baudrate tried with 15200 & also 9609.

    3) Tried to load it to the IMC101T-T038, always end with the following errors.

    Click image for larger version

Name:	error1.JPG
Views:	0
Size:	16.5 KB
ID:	5702

    Click image for larger version

Name:	error2.JPG
Views:	0
Size:	16.9 KB
ID:	5703

    4) I have attemped with those 4sec count.

    5) i request some1 counld spot a light to overcome this problem.

    Thank you

  2. #2

    Infineon Employee
    Infineon Employee
    Infineon Employee
    Infineon Employee
    snget2 is on a distinguished road
    Join Date
    Jul 2020
    Hello Vinay6217,
    There is no need to mess with txt file manually, Use MCEWizard to enable user uart protocol. Refer to SRM UART. Index, 2.3.


    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.