XMC4400 HRPWM external event start problem

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User14952
Level 1
Level 1
Welcome!
Hi.

I have experience with CCU8 CCU4 of the XMC4700. Now I start with the XMC4400 because of the HRPWM.
However, using DAVE I am not able to start the HRPWM using the external events. The DAVE app is similar to the one I use for the CCU8 and CCU4 but not the same. However I guess It should be work and start pulses.
The HW is OK because if I click on "start during initialization" the pulses appears. But if I use ext_event0, ext_event1 or ext_event1 with the "ccu8_gobal_start" or with the ST of other CCU (through event detector and event generator)
It does not work at all. Those kind of things works when I use CCU8 or CCU4 but not with the HRPWM app.
Any adviced?
I guess it should be easy and similar to the CCUx, right?
Any examples of the external events configurations on HRPWM?

Best regards, and thanks
Carlos Serrano.
0 Likes
1 Solution
Vasanth
Moderator
Moderator
Moderator
250 sign-ins 500 solutions authored First question asked
Hi,

Could you kindly check the HRPWM examples available in XMCLib examples ?

Best Regards,
Vasanth

View solution in original post

0 Likes
1 Reply
Vasanth
Moderator
Moderator
Moderator
250 sign-ins 500 solutions authored First question asked
Hi,

Could you kindly check the HRPWM examples available in XMCLib examples ?

Best Regards,
Vasanth
0 Likes