+ Reply to Thread
Results 1 to 2 of 2

Thread: XMC4400 HRPWM external event start problem

  1. #1
    Beginner Beginner CSerrano is on a distinguished road
    Join Date
    Apr 2018
    Location
    Getafe - MADRID
    Posts
    7
    Points
    105

    XMC4400 HRPWM external event start problem

    Hi.

    I have experience with CCU8 CCU4 of the XMC4700. Now I start with the XMC4400 because of the HRPWM.
    However, using DAVE I am not able to start the HRPWM using the external events. The DAVE app is similar to the one I use for the CCU8 and CCU4 but not the same. However I guess It should be work and start pulses.
    The HW is OK because if I click on "start during initialization" the pulses appears. But if I use ext_event0, ext_event1 or ext_event1 with the "ccu8_gobal_start" or with the ST of other CCU (through event detector and event generator)
    It does not work at all. Those kind of things works when I use CCU8 or CCU4 but not with the HRPWM app.
    Any adviced?
    I guess it should be easy and similar to the CCUx, right?
    Any examples of the external events configurations on HRPWM?

    Best regards, and thanks
    Carlos Serrano.

  2. #2
    Moderator
    Infineon Employee
    Infineon Employee
    Vasanth is on a distinguished road
    Join Date
    Nov 2020
    Posts
    99
    Hi,

    Could you kindly check the HRPWM examples available in XMCLib examples ?

    Best Regards,
    Vasanth

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.