+ Reply to Thread
Results 1 to 3 of 3

Thread: BGT24LTR11 and FMCW

  1. #1
    Beginner Beginner emacar is on a distinguished road
    Join Date
    Apr 2016
    Posts
    24
    Points
    117.2265625

    BGT24LTR11 and FMCW

    Hello everyone,
    I would use the BGT24LTR11 evaluation board (https://www.infineon.com/dgdl/Infine...6d2a87f2447786) in FMCW mode by applying a sawtooth wave at the V_TUNE pin.
    I check the IF signal, after an additional amplification stage with my oscilloscope but I see only the modulating sawtooth wave itself.
    I cannot understand if it is required to change in the hardware configuration of the board to be used in FMCW mode or if I can do something to avoid the modulating signal going towards the IF pin.
    Did someone use this board in FMCW rather than CW?
    Thanks in advance,

  2. #2
    Beginner Beginner emacar is on a distinguished road
    Join Date
    Apr 2016
    Posts
    24
    Points
    117.2265625
    Is there someone who can help me?

  3. #3
    Beginner Beginner
    Infineon Employee
    Infineon Employee
    tinymanta is on a distinguished road
    Join Date
    Jan 2019
    Location
    Munich
    Posts
    37
    Points
    126.40625
    Hello emacar,

    Can you please specify which Board are you using ? The BGT24LTR11 radar sensor is embedded in the DEMO DISTANCE2GOL, DEMO SENSE2GOL PULSE, DEMO SENSE2GOL and EVAL BGT24LTR11.

    Best Regards,
    Montassar.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.