Irml9301trpbf

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
ShawnF
Level 1
Level 1
5 replies posted 10 sign-ins 5 questions asked
Dear experts,

We bought IRLML9301MTRPBF from franchised source.
During inspection, we observed nn the same date code:
1. Different die sizes
2. Different number of wires
3. Different country of diffusion. China n Philippines.

I cannot find any PCN on this on Infineon nor any public domain.
Can you advise if both are LOT are valid n share a copy of the PCN if it's available. Thank you!
0 Likes
1 Solution
Abhilash_P
Moderator
Moderator
Moderator
50 likes received 500 replies posted 250 solutions authored
Hi Shawnfong,

After checking with the packaging team regarding this issue, we have got the following response,
the parts which you have received are counterfeit. Please take up this issue with the distributor. The chip is not even ours inside the package. The bad batch will have to be replaced and a counterfeit investigation has been initiated with the distributor. The real geometry is as shown below,

5233.attach

Regards,
Abhilash P

View solution in original post

0 Likes
1 Reply
Abhilash_P
Moderator
Moderator
Moderator
50 likes received 500 replies posted 250 solutions authored
Hi Shawnfong,

After checking with the packaging team regarding this issue, we have got the following response,
the parts which you have received are counterfeit. Please take up this issue with the distributor. The chip is not even ours inside the package. The bad batch will have to be replaced and a counterfeit investigation has been initiated with the distributor. The real geometry is as shown below,

5233.attach

Regards,
Abhilash P
0 Likes