Multican_1_kit_tc297_tft can tx & rx

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User20712
Level 1
Level 1
[PROBLEM SOLVED]

Hi Admin,

There are two CAN nodes on MULTICAN_1_KIT_TC297_TFT example. First node is used for transmit and second node is used for receive data in loop back mode.

I removed loop back mode on first node and initialized the pins to transmit data to external device, it works properly.

I tried to receive the data by replacing all the initialization code of second node using first node for receiving data, unfortunately it does not work at all.
Is it possible to transmit and receive using one node ? If yes, is there any example or instruction for the configuration ?



Thanks.

Regards,
Khafizuddin Azazi

[PROBLEM SOLVED]
0 Likes
3 Replies
User20712
Level 1
Level 1
This problem has been solved.
0 Likes
LijoDan
Level 2
Level 2
25 sign-ins 10 replies posted First question asked

what was your solution,  i have the same problem, not able to activate the Recieve ISR

0 Likes
UNknown_12
Level 1
Level 1
10 sign-ins 5 sign-ins First reply posted

what is the solution, i have facing the same issue

 

0 Likes