+ Reply to Thread
Results 1 to 2 of 2

Thread: TLE75008 Open load detection

  1. #1
    New Member New Member Devin is on a distinguished road
    Join Date
    Apr 2021
    Posts
    1
    Points
    30

    TLE75008 Open load detection

    Hi there,

    We use the TLE75008 in our production,We need use open load detection,and have some question about it.
    According datasheet,we need to enable IOL,and in off stage,we can read the status from reg.
    But it seems we need drive at least one channel ON if we want to do open load detection,is that right?

  2. #2
    New Member New Member
    Infineon Employee
    Infineon Employee
    cbg is on a distinguished road
    Join Date
    Apr 2015
    Posts
    7
    Points
    83.125
    Hi Devin,
    in order to use the open load detection of the TLE75008-ESD you have to enable the diagnostic current IOL for the channels you want to monitor by setting the corresponding OUTn bits to 1 in the DIAG_IOL register.
    Please note that that you have to wait for a certain time until the DIAG_OSM.OUTn bits are valid after switching a channel on and off or turning on the diagnostic current source as described in chapter 9.2 "Output Status Monitor" in the datasheet.
    The open load detection works in OFF state only, you do not have to turn the channel ON to detect an open load situation.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.