Incorrect/ Missing Memory Maps in User Manual TC3xx

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
nsyed
Level 5
Level 5
5 likes given 100 sign-ins 50 sign-ins
I was checking the Memory Maps in the User Manual of TC3xx - V1.3.0, Section#2 MEMMAP V0.1.16. I have below observations, Can you please clarify if these are typo’s or what the correct address range is.
0 Likes
5 Replies
Darren_Galpin
Employee
Employee
First solution authored First like received
Hi Nadeem - good spot, and I see the same problem in internal documentation when I checked it. For the SDMMC, please assume that the start of the reserved location is wrong, and for the others, please assume that the reserved location should cover the missing addresses. I have raised an internal issue request to get this fixed - thanks for reporting it.
0 Likes
nsyed
Level 5
Level 5
5 likes given 100 sign-ins 50 sign-ins
Thanks for clarifying. I found AURIX forum very helpful to clarify and address these type of questions. Hope to see these fixes in the future release of User manual.
0 Likes
TBencher
Level 6
Level 6
25 solutions authored 25 likes received 5 questions asked
Hi Darren,

could you please check this also for TC2XX?

@Nadeem
Very good!

Regards,

Jens
0 Likes
Darren_Galpin
Employee
Employee
First solution authored First like received
Hi Jens,

Not an issue on TC2XX - the 0xFA addresses are all reserved/SRIBE, the 0xF02 addresses are all SPBE reserved, and the other gap is where the MULTICAN was.

Cheers,

Darren
0 Likes
TBencher
Level 6
Level 6
25 solutions authored 25 likes received 5 questions asked
Hi Darren,

perfect 🙂


Regards,

Jens
0 Likes