Apr 07, 2021
04:36 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 07, 2021
04:36 AM
Hi,
I'm currently trying to use the DAP Miniwiggler to program XMC1000 MCU ... The connection diagram is as following
But then I get the following error
What is the the reason for this issue?
Thanks
Nour
I'm currently trying to use the DAP Miniwiggler to program XMC1000 MCU ... The connection diagram is as following
But then I get the following error
What is the the reason for this issue?
Thanks
Nour
Solved! Go to Solution.
- Tags:
- IFX
1 Solution
Apr 15, 2021
01:17 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 15, 2021
01:17 AM
Hi Nour,
You won't be able to use JLink with DAP interface for Miniwiggler.
If you are using the DAP interface, you should connect the miniWiggler with XMC device with the 10-pin connector.
I believe you have downloaded DAS server, if haven't, please download and install it. After you connect, open DAS device scanner and start the DAS server. Then click installed server and choose UDAS.
Now the UDAS will be running and you should see the device connected on the DAS device scanner window. After you see the device is connected (show on DAS device scanner window) , you just select
UDAS from DAVE debug configuration and it should be able to debug via miniWiggler.
If you are planning to use the Jlink, you can make use of On board jlink debugger available with the kits.
Best Regards,
Vasanth
You won't be able to use JLink with DAP interface for Miniwiggler.
If you are using the DAP interface, you should connect the miniWiggler with XMC device with the 10-pin connector.
I believe you have downloaded DAS server, if haven't, please download and install it. After you connect, open DAS device scanner and start the DAS server. Then click installed server and choose UDAS.
Now the UDAS will be running and you should see the device connected on the DAS device scanner window. After you see the device is connected (show on DAS device scanner window) , you just select
UDAS from DAVE debug configuration and it should be able to debug via miniWiggler.
If you are planning to use the Jlink, you can make use of On board jlink debugger available with the kits.
Best Regards,
Vasanth
1 Reply
Apr 15, 2021
01:17 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 15, 2021
01:17 AM
Hi Nour,
You won't be able to use JLink with DAP interface for Miniwiggler.
If you are using the DAP interface, you should connect the miniWiggler with XMC device with the 10-pin connector.
I believe you have downloaded DAS server, if haven't, please download and install it. After you connect, open DAS device scanner and start the DAS server. Then click installed server and choose UDAS.
Now the UDAS will be running and you should see the device connected on the DAS device scanner window. After you see the device is connected (show on DAS device scanner window) , you just select
UDAS from DAVE debug configuration and it should be able to debug via miniWiggler.
If you are planning to use the Jlink, you can make use of On board jlink debugger available with the kits.
Best Regards,
Vasanth
You won't be able to use JLink with DAP interface for Miniwiggler.
If you are using the DAP interface, you should connect the miniWiggler with XMC device with the 10-pin connector.
I believe you have downloaded DAS server, if haven't, please download and install it. After you connect, open DAS device scanner and start the DAS server. Then click installed server and choose UDAS.
Now the UDAS will be running and you should see the device connected on the DAS device scanner window. After you see the device is connected (show on DAS device scanner window) , you just select
UDAS from DAVE debug configuration and it should be able to debug via miniWiggler.
If you are planning to use the Jlink, you can make use of On board jlink debugger available with the kits.
Best Regards,
Vasanth