POSIF on XMC1404

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User11773
Level 4
Level 4
First like received First solution authored
Since we're still waiting on a POSIF app ...

I'm using XMC_Lib, using XMC_POSIF_Init etc

I want to test the POSIF , I'm using an XMC1400boot board. (I could use a XMC1300 Boot as well).
I will connect Hall sensors to POSIF inputs.
For testing I would like POSIF1.OUT to generate an interrupt on each Hall transition.
How do I do this?
Can I connect POSIF to a APP (CCU or Interrupt etc)?

Also, there is mention of low pass filters on inputs, but very little info on them. Is there more info available?
I would like to test them.
0 Likes
1 Solution
User11773
Level 4
Level 4
First like received First solution authored
I've got it working. And I've got it connected to a CCU4 to calculate speed.
IDLE bit caused me grief.
Please still get that POSIF app out.

View solution in original post

0 Likes
3 Replies
User11773
Level 4
Level 4
First like received First solution authored
I've got it working. And I've got it connected to a CCU4 to calculate speed.
IDLE bit caused me grief.
Please still get that POSIF app out.
0 Likes
Vasanth
Moderator
Moderator
Moderator
250 sign-ins 500 solutions authored First question asked
Hi Tim,

The following appnote will be helpful while working with POSIF.

Best Regards,
Vasanth R S
0 Likes
User11773
Level 4
Level 4
First like received First solution authored
Thank you. Yes I was using that.
0 Likes