Using 1EDN8550B as 48V 80A High Side Switch

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User21395
Level 1
Level 1
Hi,

I am trying to understand if I can use 1EDN8550B as a high side load switch for my system. My system is running from a 48V battery with Max current of 80A. The system so far consumes around 30A of current which consists of a combination of DC and BLDC motors and intelligent controllers.

The design that I am trying to use is for the safety system just before the buck converter, hence wanted to understand if this will a feasible solution.

The datasheet shows a high side switch application (Figure 11, topic 6.4) and I am wondering if I can do the same for a high side switch.

Thanks a lot in advance
Naman vaidya
0 Likes
1 Solution
AZIZ_HASSAN
Moderator
Moderator
Moderator
50 likes received 5 likes given 250 sign-ins

Hi,

Yes can you can use it as high side gate driver switch.

BR,

AZIZ HASSAN

View solution in original post

0 Likes
1 Reply
AZIZ_HASSAN
Moderator
Moderator
Moderator
50 likes received 5 likes given 250 sign-ins

Hi,

Yes can you can use it as high side gate driver switch.

BR,

AZIZ HASSAN

0 Likes