Problem with IPC50N04S5_5R8_L0 SPICE MODEL

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User21394
Level 1
Level 1
First question asked
There is an error while interpreting sub-circuit for spice block, the error information is as below:
Parser error in line 2
Expression A=1 could not be read.
context : .SUBCKT S4-40_A_VAR DD G S0 SP TJ PARAMS: A=1 RSP=1 DVTH=0 DRDSON=0 DGFS=0 INN=1 UNN=1 RMAX=1 GMIN=1 RS=1 RP=1 DC=0 RMET=1U
What's the reason?
0 Likes
1 Solution
Anshika_G
Moderator
Moderator
Moderator
First question asked 50 likes received 250 replies posted

Hello,
Thank you for posting on Infineon Community.

Please let us know which simulation software you are using. Infineon products work great with Infineon simulation software. 
In case you are using Infineon Simulation software:
As per the error, parser error generally means some issue in installing; please see to it .
Also, it says the error is in line 2, which suggests a syntax error, probably a compatibility issue. 
Please share the error message screenshot so that we can verify it at our end and help you in a better way.

Thanks and Regards,
Anshika

View solution in original post

0 Likes
1 Reply
Anshika_G
Moderator
Moderator
Moderator
First question asked 50 likes received 250 replies posted

Hello,
Thank you for posting on Infineon Community.

Please let us know which simulation software you are using. Infineon products work great with Infineon simulation software. 
In case you are using Infineon Simulation software:
As per the error, parser error generally means some issue in installing; please see to it .
Also, it says the error is in line 2, which suggests a syntax error, probably a compatibility issue. 
Please share the error message screenshot so that we can verify it at our end and help you in a better way.

Thanks and Regards,
Anshika

0 Likes