Hello,

I want to used the LTspice to simulate the BTN8962TA.

On the limitation of the model, it's not write that SR pin isn't taking into account.
But, If I change the SR resistor from SR pin to ground from 0ohm to 51kohm, nothing change about the rise and fall time.
Simulation with SR = 51Kohm
Click image for larger version

Name:	Rise_time_SR_51k.PNG
Views:	0
Size:	12.6 KB
ID:	5539

It's the model and and the half bridge file without modification from Infineon.
So, the thermal result is wrong and I would like make the FFT of the output voltage, but it will be wrong also.

Is it a limitation on the spice model or an error of the model?

Thank you