Feb 15, 2021
06:43 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 15, 2021
06:43 AM
Does the TLD1211 support such protection functions?
Solved! Go to Solution.
Labels
- Labels:
-
ispn:4528:1:0
-
l1:144:1:0
-
l2:203:1:0
-
l3:204:1:0
- Tags:
- IFX
1 Solution
Feb 15, 2021
09:24 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 15, 2021
09:24 AM
Hello,
The TLD1211SJ reacts on OL or SC according to the following table:
Please note that as the control loop in open load and short circuit behaves the same (VSENSE ~0V), the current consumption is expected to be the same for the two faults, <1.7 mA (parasitic effects could make some difference).
The TLD1211SJ is also protected against overload, overvoltage and overtemperature. In case of those faults the output current will decrease, protecting not only the IC but also the LEDs.
Please refer to the datasheet of TLD1211SJ for more details.
The TLD1211SJ reacts on OL or SC according to the following table:
Please note that as the control loop in open load and short circuit behaves the same (VSENSE ~0V), the current consumption is expected to be the same for the two faults, <1.7 mA (parasitic effects could make some difference).
The TLD1211SJ is also protected against overload, overvoltage and overtemperature. In case of those faults the output current will decrease, protecting not only the IC but also the LEDs.
Please refer to the datasheet of TLD1211SJ for more details.
1 Reply
Feb 15, 2021
09:24 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 15, 2021
09:24 AM
Hello,
The TLD1211SJ reacts on OL or SC according to the following table:
Please note that as the control loop in open load and short circuit behaves the same (VSENSE ~0V), the current consumption is expected to be the same for the two faults, <1.7 mA (parasitic effects could make some difference).
The TLD1211SJ is also protected against overload, overvoltage and overtemperature. In case of those faults the output current will decrease, protecting not only the IC but also the LEDs.
Please refer to the datasheet of TLD1211SJ for more details.
The TLD1211SJ reacts on OL or SC according to the following table:
Please note that as the control loop in open load and short circuit behaves the same (VSENSE ~0V), the current consumption is expected to be the same for the two faults, <1.7 mA (parasitic effects could make some difference).
The TLD1211SJ is also protected against overload, overvoltage and overtemperature. In case of those faults the output current will decrease, protecting not only the IC but also the LEDs.
Please refer to the datasheet of TLD1211SJ for more details.