Jan 25, 2021
12:41 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 25, 2021
12:41 AM
Can an over load condition be detected by TLD5099EP using the open feedback condition and does it also work for TLD5098EP and TLD5097EP?
Solved! Go to Solution.
- Tags:
- IFX
1 Solution
Jan 25, 2021
02:39 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 25, 2021
02:39 AM
Yes, the overload condition is similar to Open FBL condition where VFBH - VFBL is larger than 0.5 V
Please refer to the Protection and diagnostic functions chapter in the corresponding datasheet - see https://www.infineon.com/cms/en/product/power/lighting-ics/litix-automotive-led-driver-ic/litix-powe...
Please refer to the Protection and diagnostic functions chapter in the corresponding datasheet - see https://www.infineon.com/cms/en/product/power/lighting-ics/litix-automotive-led-driver-ic/litix-powe...
1 Reply
Jan 25, 2021
02:39 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 25, 2021
02:39 AM
Yes, the overload condition is similar to Open FBL condition where VFBH - VFBL is larger than 0.5 V
Please refer to the Protection and diagnostic functions chapter in the corresponding datasheet - see https://www.infineon.com/cms/en/product/power/lighting-ics/litix-automotive-led-driver-ic/litix-powe...
Please refer to the Protection and diagnostic functions chapter in the corresponding datasheet - see https://www.infineon.com/cms/en/product/power/lighting-ics/litix-automotive-led-driver-ic/litix-powe...