+ Reply to Thread
Results 1 to 2 of 2

Thread: How can I be sure that the transmission error bit TER is safely detected?

  1. #1
    New Member New Member gustavo is on a distinguished road
    Join Date
    Nov 2020
    Posts
    2
    Points
    45

    How can I be sure that the transmission error bit TER is safely detected?

    I'm concerned about an identical identification of a TER message with a read back of a register command.
    Could there be a mix match between STD Diagnosis and Read Commands?
    What to do to reliably detect a TER case?

  2. #2

    Infineon Employee
    Infineon Employee
    LED-Peter is on a distinguished road
    Join Date
    Nov 2020
    Location
    Munich, Germany
    Posts
    23
    There are two ways to check if a transmission error has happened:

    1) Monitor the TER flag on the SO pin in the time window between the chip select assertion and the first clock rising edge, please refer on figure 28 of the TLD5501-2QV datasheet. Usually this solution requires extra HW (i.e. one extra GPIO).
    2) Monitor the TER bit in the standard diagnosis. You can distinguish the standard diagnosis frame from another frame response by checking the frame MSB. In a standard diagnosis frame the MSB is set to 0. In case of a response after a reading request the TLD5501-2QV is setting the MSB of the frame to 1.

    Find the datasheet and more information on https://www.infineon.com/cms/en/prod...x/tld5501-2qv/

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.