Nov 26, 2020
10:19 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 26, 2020
10:19 AM
When debugging a program, I get something like a timeout.
On 2nd debug, it works.
Seems related to code size. Code size about 250k as per arm-none-eabi-size.
Erasing takes about 4 sec
Programming ? about the same. The progress bar gets about 1/2 way across then window disappears.
There is a brief message in the disassembly window.
If I issue a debug again, it all works. I think because the programming from before completed. So on 2nd debug, it compares ok and does its thing stopping at main.
Seems like Dave/Eclipse not waiting long enough for the programming.
Any ideas on what to do?
On 2nd debug, it works.
Seems related to code size. Code size about 250k as per arm-none-eabi-size.
Erasing takes about 4 sec
Programming ? about the same. The progress bar gets about 1/2 way across then window disappears.
There is a brief message in the disassembly window.
If I issue a debug again, it all works. I think because the programming from before completed. So on 2nd debug, it compares ok and does its thing stopping at main.
Seems like Dave/Eclipse not waiting long enough for the programming.
Any ideas on what to do?
- Tags:
- IFX
3 Replies
Nov 28, 2020
01:26 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 28, 2020
01:26 AM
Hi,
Which version of the JLink software are you using?
Regards,
Jesus
Which version of the JLink software are you using?
Regards,
Jesus
Dec 02, 2020
08:09 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 02, 2020
08:09 AM
Hi Jesus,
Whats the best way to tell the version of JLink?
in console : SEGGER J-Link GDB Server V6.62d - Terminal output channel
Whats the best way to tell the version of JLink?
in console : SEGGER J-Link GDB Server V6.62d - Terminal output channel
Dec 03, 2020
03:01 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 03, 2020
03:01 AM
Hi,
Please try updating the JLink Software to the latest version, https://www.segger.com/downloads/jlink/JLink_Windows.exe
Regards,
Jesus
Please try updating the JLink Software to the latest version, https://www.segger.com/downloads/jlink/JLink_Windows.exe
Regards,
Jesus