Nov 18, 2020
12:50 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 18, 2020
12:50 AM
Hello *,
We are developing a safety-critical application (IEC61508 - SIL2) using both the toolchain and the PXROS-HR operating system provided by Hightec on a Infineon AURIX TC299 device.
According to PXROS-HR implementation guidelines, interrupts should never be disabled in the FW application. But, we are also used your iLLD, which in turn foreseen the disabling of interrupts.
May this bring to conflicts? An how can we be sure that the iLLD functions we are using do not disable Interrupts (i.e. can we simply empty functions "IfxCpu_disableInterrupts" and "IfxCpu_enableInterrupts")?
Many thanks,
Marco Rona
We are developing a safety-critical application (IEC61508 - SIL2) using both the toolchain and the PXROS-HR operating system provided by Hightec on a Infineon AURIX TC299 device.
According to PXROS-HR implementation guidelines, interrupts should never be disabled in the FW application. But, we are also used your iLLD, which in turn foreseen the disabling of interrupts.
May this bring to conflicts? An how can we be sure that the iLLD functions we are using do not disable Interrupts (i.e. can we simply empty functions "IfxCpu_disableInterrupts" and "IfxCpu_enableInterrupts")?
Many thanks,
Marco Rona
0 Replies