+ Reply to Thread
Results 1 to 3 of 3

Thread: IMC102T-F064 Setting up PFC

  1. #1
    New Member New Member Mahdi1368 is on a distinguished road
    Join Date
    Oct 2020
    Posts
    2
    Points
    35

    IMC102T-F064 Setting up PFC

    Hi
    Thank you very much for designing the IC controller IMC102T-F064.
    I configured this IC to start the Motor with PFC using UART connection.
    I have no problem starting the Motor, but when I put the input control on VSP, the Motor starts but the power factor correction (PFC) does not start.
    How can I start control input mode VSP, both motor and power factor correction(PFC) in input mode?
    Should the power factor correction(PFC) command be given in the script? (PFC_command=1)?
    Thank you.

  2. #2

    Infineon Employee
    Infineon Employee
    Expert
    Infineon Employee
    Infineon Employee
    snget2 is on a distinguished road
    Join Date
    Jul 2020
    Posts
    9
    Hello Mahdi1368,
    There is no built-in logic to link VSP with the operation of PFC. One needs to write up some script code to make it happen for a given application.
    Some pseudo code for example.
    If command = 1
    Then PFC_command=1
    Else
    PFC_command=0

    Regard,
    Sid
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  3. #3
    New Member New Member Mahdi1368 is on a distinguished road
    Join Date
    Oct 2020
    Posts
    2
    Points
    35
    Thanks for reply

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.