D2G updated firmware .hex files.

Announcements

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User20265
Level 1
Level 1
First reply posted First question asked
Hi,
I've just started using my Distance2Go kit, the GUI interface tells me to update the firmware but I have not been able to find the file to FLASH into the board.
Where is the updated firmware hex file for the Distance2Go board?
Thanks.
0 Likes
1 Solution
Montassar-BR
Employee
Employee
5 questions asked 250 sign-ins 25 likes received

Hi Monika,

Please refer to the folder IFX_D2G-HW-SW_V2.0.x\Firmware_Software\Binary, there you will find different .hex files for different FW configurations running on the D2G board.
You can use the XMC Flasher, available tool from the Infineon Toolbox (installed with your Distance2Go Kit).

Best Regards,
Montassar

View solution in original post

0 Likes
1 Reply
Montassar-BR
Employee
Employee
5 questions asked 250 sign-ins 25 likes received

Hi Monika,

Please refer to the folder IFX_D2G-HW-SW_V2.0.x\Firmware_Software\Binary, there you will find different .hex files for different FW configurations running on the D2G board.
You can use the XMC Flasher, available tool from the Infineon Toolbox (installed with your Distance2Go Kit).

Best Regards,
Montassar

0 Likes