IMC102T-F064: Gang programmer?

Announcements

From sunburn to sun earn – we’ve got the power! Watch our #poweringgreen videos now.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
AG_Serad
Level 4
Level 4
First solution authored 25 replies posted 25 sign-ins
Hello

I will start to evaluate the IMC102T-F064 with the evaluation boar which include a Seeger debbuger to communicate between IMC102T-F064 UART0 and PC via USB.
This is ok in engineer office to play with the eval board, and then on our future specific hardware board by buy the specific Imotion-Link (https://www.infineon.com/cms/en/product/evaluation-boards/imotion-link/)

But after that, in manufacturer phase, when we will produce over 1000pcs, is existing "Gang programmer" which allow to programme "Firmware + Parameters + Script" with a standalone "box" which will program device with a "press button" without need have a computer with IMotion Tool and the IMotion-Link and then flash?

Else, is the MCUDesigner Tool, used to programme "Firmware + Parameters + Script" could be use into "Command line" mode?

Thank
0 Likes
9 Replies
AG_Serad
Level 4
Level 4
First solution authored 25 replies posted 25 sign-ins
Hello
Do not response yet from my request since many days.

These points are critical to start our project with this product or not.
It is the bigest project we had, our quantity will be about 4000pcs/years…
May be a small quantity for you…

Please, take time to respond to my request.
Also request done by technical support without any success.

Thank
Regards
0 Likes
dakh_4791506
Employee
Employee
First like received First solution authored
Hello,
A gang programmer is available from an external company Xeltek. Please find their information below.

Xeltek Co.,Ltd
http://www.xeltek.com.cn

Online (SUPERPRO IS416) and offline (SUPERPRO 7500) solutions are available for the IMC102T-F064.
0 Likes
AG_Serad
Level 4
Level 4
First solution authored 25 replies posted 25 sign-ins
Hello,

The SUPERPRO IS416 seems good, but the IMC10T-F064 not appears on the devices list:
MICROCONTROLLER

IMM101T-046M@QFN12x12 [FX-ISP1005], IMM101T-056M@QFN12x12 [FX-ISP1005],
IMM102T-015M@QFN12x12 [FX-ISP1005], IMM102T-046M@QFN12x12 [FX-ISP1005],
IMM102T-056M@QFN12x12 [FX-ISP1005], IMM101T-015M@QFN12x12 [FX-ISP1005],
SAF-XC822-1FRA@ISP [FX-ISP1004], SAF-XC822-1FRI@ISP [FX-ISP1004],
SAF-XC822M-1FRA@ISP [FX-ISP1004], SAF-XC822M-1FRI@ISP [FX-ISP1004],
SAF-XC822MT-1FRA@ISP [FX-ISP1004], SAF-XC822MT-1FRI@ISP [FX-ISP1004],
SAF-XC822T-0FRA@ISP [FX-ISP1004], SAF-XC822T-0FRI@ISP [FX-ISP1004],
SAF-XC822T-1FRA@ISP [FX-ISP1004], SAF-XC822T-1FRI@ISP [FX-ISP1004],
SAF-XC824M-1FGA@ISP [FX-ISP1004], SAF-XC824M-1FGI@ISP [FX-ISP1004],
SAF-XC824MT-1FGA@ISP [FX-ISP1004], SAF-XC824MT-1FGI@ISP [FX-ISP1004],
SAF-XC835MT-2FRA@ISP [FX-ISP1004], SAF-XC835MT-2FRI@ISP [FX-ISP1004],
SAF-XC836-2FRA@ISP [FX-ISP1004], SAF-XC836-2FRI@ISP [FX-ISP1004],
SAF-XC836M-1FRA@ISP [FX-ISP1004], SAF-XC836M-1FRI@ISP [FX-ISP1004],
SAF-XC836M-2FRA@ISP [FX-ISP1004], SAF-XC836M-2FRI@ISP [FX-ISP1004],
SAF-XC836MT-2FRA@ISP [FX-ISP1004], SAF-XC836MT-2FRI@ISP [FX-ISP1004],
SAF-XC836T-2FRA@ISP [FX-ISP1004], SAF-XC836T-2FRI@ISP [FX-ISP1004],
SAK-XC824M-1FGA@ISP [FX-ISP1004], SAK-XC824M-1FGI@ISP [FX-ISP1004],
SAX-XC824M-1FGA@ISP [FX-ISP1004], SAX-XC824M-1FGI@ISP [FX-ISP1004],
SP40@SOIC8 [FX-ISP1004], TLE9842-2QX@QFN48 [IS416VLT],
TLE9842-QX@QFN48 [IS416VLT], TLE9844-2QX@QFN48 [IS416VLT],
TLE9867@QFN48 [FX-ISP1006], TLE9867_007@QFN48 [FX-ISP1007],
XC2224-20F66L [FX-ISP1005], IMC300@QFP100 [FX-ISP1005],


Is its list is not updated?
0 Likes
dakh_4791506
Employee
Employee
First like received First solution authored
Please inquire with Xeltek. They are familiar with the IMC102T-F046 and will include support for this part.
0 Likes
AG_Serad
Level 4
Level 4
First solution authored 25 replies posted 25 sign-ins
Ok, this is in progress on Xeltek
0 Likes
AG_Serad
Level 4
Level 4
First solution authored 25 replies posted 25 sign-ins
Hello
This post just to inform Xeltek replys:

- They support the IMC102T in Off-line mode for SUPERPRO/7500
- They could support the IMC102T, but they need to develop the software in ISP mode for SUPERPRO/IS416

- They can't provide isolated probes. We must make them ourself.
- They did not indicate me the price for the SUPERPRO/IS416 despite several repeated requests.

Is SUPERPRO/IS416 is the alone solution on the market to flash programming in situ the IMC102T for mass production?

Regards,
0 Likes
snget2
Moderator
Moderator
Moderator
5 sign-ins First like received 25 replies posted
Hello Arnaud,
We will contact Xeltek for this issue you are facing.
We will let you know later.
Regard,
Sid
0 Likes
snget2
Moderator
Moderator
Moderator
5 sign-ins First like received 25 replies posted
Hello arnaud,
We did contact XELTEK, they respond with us with direct contact.

Please contact,
Chen Zhiqiang
Xeltek Electronic Co., Ltd,
#1, Jiangyun Rd.,
Jiangning, Nanjing, P.R.China , ZIP 211111
+86-25-68161208
info@xeltek-cn.com
www.xeltek-cn.com/en/

Please contact bjs@xeltek-cn.com for any technical questions and zjb@xeltek-cn.com for purchasing issues.
0 Likes
User22602
Level 1
Level 1
First solution authored
Inquire directly with Xeltek. They definitely know the IMC102T-F046 and will include support for this part.
Please visit our sites also: https://www.cantonheatingcooling.com/ : https://www.cantonjunkremoval.com/ : http://www.cantonpaving.com/ : https://www.cantonmiroofing.com/ : http://www.snowremovalcanton.com/ : https://www.cantonwaterheaterservice.com/
0 Likes