Aug 27, 2020
07:33 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 27, 2020
07:33 AM
Hello
I will start to evaluate the IMC102T-F064 with the evaluation boar which include a Seeger debbuger to communicate between IMC102T-F064 UART0 and PC via USB.
This is ok in engineer office to play with the eval board, and then on our future specific hardware board by buy the specific Imotion-Link (https://www.infineon.com/cms/en/product/evaluation-boards/imotion-link/)
But after that, in manufacturer phase, when we will produce over 1000pcs, is existing "Gang programmer" which allow to programme "Firmware + Parameters + Script" with a standalone "box" which will program device with a "press button" without need have a computer with IMotion Tool and the IMotion-Link and then flash?
Else, is the MCUDesigner Tool, used to programme "Firmware + Parameters + Script" could be use into "Command line" mode?
Thank
I will start to evaluate the IMC102T-F064 with the evaluation boar which include a Seeger debbuger to communicate between IMC102T-F064 UART0 and PC via USB.
This is ok in engineer office to play with the eval board, and then on our future specific hardware board by buy the specific Imotion-Link (https://www.infineon.com/cms/en/product/evaluation-boards/imotion-link/)
But after that, in manufacturer phase, when we will produce over 1000pcs, is existing "Gang programmer" which allow to programme "Firmware + Parameters + Script" with a standalone "box" which will program device with a "press button" without need have a computer with IMotion Tool and the IMotion-Link and then flash?
Else, is the MCUDesigner Tool, used to programme "Firmware + Parameters + Script" could be use into "Command line" mode?
Thank
Labels
- Tags:
- IFX
9 Replies
Sep 04, 2020
03:00 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 04, 2020
03:00 AM
Hello
Do not response yet from my request since many days.
These points are critical to start our project with this product or not.
It is the bigest project we had, our quantity will be about 4000pcs/years…
May be a small quantity for you…
Please, take time to respond to my request.
Also request done by technical support without any success.
Thank
Regards
Do not response yet from my request since many days.
These points are critical to start our project with this product or not.
It is the bigest project we had, our quantity will be about 4000pcs/years…
May be a small quantity for you…
Please, take time to respond to my request.
Also request done by technical support without any success.
Thank
Regards
Sep 09, 2020
02:32 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 09, 2020
02:32 PM
Hello,
A gang programmer is available from an external company Xeltek. Please find their information below.
Xeltek Co.,Ltd
http://www.xeltek.com.cn
Online (SUPERPRO IS416) and offline (SUPERPRO 7500) solutions are available for the IMC102T-F064.
A gang programmer is available from an external company Xeltek. Please find their information below.
Xeltek Co.,Ltd
http://www.xeltek.com.cn
Online (SUPERPRO IS416) and offline (SUPERPRO 7500) solutions are available for the IMC102T-F064.
Sep 09, 2020
11:02 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 09, 2020
11:02 PM
Hello,
The SUPERPRO IS416 seems good, but the IMC10T-F064 not appears on the devices list:
Is its list is not updated?
The SUPERPRO IS416 seems good, but the IMC10T-F064 not appears on the devices list:
MICROCONTROLLER
IMM101T-046M@QFN12x12 [FX-ISP1005], IMM101T-056M@QFN12x12 [FX-ISP1005],
IMM102T-015M@QFN12x12 [FX-ISP1005], IMM102T-046M@QFN12x12 [FX-ISP1005],
IMM102T-056M@QFN12x12 [FX-ISP1005], IMM101T-015M@QFN12x12 [FX-ISP1005],
SAF-XC822-1FRA@ISP [FX-ISP1004], SAF-XC822-1FRI@ISP [FX-ISP1004],
SAF-XC822M-1FRA@ISP [FX-ISP1004], SAF-XC822M-1FRI@ISP [FX-ISP1004],
SAF-XC822MT-1FRA@ISP [FX-ISP1004], SAF-XC822MT-1FRI@ISP [FX-ISP1004],
SAF-XC822T-0FRA@ISP [FX-ISP1004], SAF-XC822T-0FRI@ISP [FX-ISP1004],
SAF-XC822T-1FRA@ISP [FX-ISP1004], SAF-XC822T-1FRI@ISP [FX-ISP1004],
SAF-XC824M-1FGA@ISP [FX-ISP1004], SAF-XC824M-1FGI@ISP [FX-ISP1004],
SAF-XC824MT-1FGA@ISP [FX-ISP1004], SAF-XC824MT-1FGI@ISP [FX-ISP1004],
SAF-XC835MT-2FRA@ISP [FX-ISP1004], SAF-XC835MT-2FRI@ISP [FX-ISP1004],
SAF-XC836-2FRA@ISP [FX-ISP1004], SAF-XC836-2FRI@ISP [FX-ISP1004],
SAF-XC836M-1FRA@ISP [FX-ISP1004], SAF-XC836M-1FRI@ISP [FX-ISP1004],
SAF-XC836M-2FRA@ISP [FX-ISP1004], SAF-XC836M-2FRI@ISP [FX-ISP1004],
SAF-XC836MT-2FRA@ISP [FX-ISP1004], SAF-XC836MT-2FRI@ISP [FX-ISP1004],
SAF-XC836T-2FRA@ISP [FX-ISP1004], SAF-XC836T-2FRI@ISP [FX-ISP1004],
SAK-XC824M-1FGA@ISP [FX-ISP1004], SAK-XC824M-1FGI@ISP [FX-ISP1004],
SAX-XC824M-1FGA@ISP [FX-ISP1004], SAX-XC824M-1FGI@ISP [FX-ISP1004],
SP40@SOIC8 [FX-ISP1004], TLE9842-2QX@QFN48 [IS416VLT],
TLE9842-QX@QFN48 [IS416VLT], TLE9844-2QX@QFN48 [IS416VLT],
TLE9867@QFN48 [FX-ISP1006], TLE9867_007@QFN48 [FX-ISP1007],
XC2224-20F66L [FX-ISP1005], IMC300@QFP100 [FX-ISP1005],
Is its list is not updated?
Sep 11, 2020
12:14 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 11, 2020
12:14 PM
Please inquire with Xeltek. They are familiar with the IMC102T-F046 and will include support for this part.
Sep 13, 2020
10:59 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 13, 2020
10:59 PM
Ok, this is in progress on Xeltek
Oct 06, 2020
07:58 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 06, 2020
07:58 AM
Hello
This post just to inform Xeltek replys:
- They support the IMC102T in Off-line mode for SUPERPRO/7500
- They could support the IMC102T, but they need to develop the software in ISP mode for SUPERPRO/IS416
- They can't provide isolated probes. We must make them ourself.
- They did not indicate me the price for the SUPERPRO/IS416 despite several repeated requests.
Is SUPERPRO/IS416 is the alone solution on the market to flash programming in situ the IMC102T for mass production?
Regards,
This post just to inform Xeltek replys:
- They support the IMC102T in Off-line mode for SUPERPRO/7500
- They could support the IMC102T, but they need to develop the software in ISP mode for SUPERPRO/IS416
- They can't provide isolated probes. We must make them ourself.
- They did not indicate me the price for the SUPERPRO/IS416 despite several repeated requests.
Is SUPERPRO/IS416 is the alone solution on the market to flash programming in situ the IMC102T for mass production?
Regards,
Oct 06, 2020
11:23 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 06, 2020
11:23 AM
Hello Arnaud,
We will contact Xeltek for this issue you are facing.
We will let you know later.
Regard,
Sid
We will contact Xeltek for this issue you are facing.
We will let you know later.
Regard,
Sid
Oct 09, 2020
10:31 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 09, 2020
10:31 AM
Hello arnaud,
We did contact XELTEK, they respond with us with direct contact.
Please contact,
Chen Zhiqiang
Xeltek Electronic Co., Ltd,
#1, Jiangyun Rd.,
Jiangning, Nanjing, P.R.China , ZIP 211111
+86-25-68161208
info@xeltek-cn.com
www.xeltek-cn.com/en/
Please contact bjs@xeltek-cn.com for any technical questions and zjb@xeltek-cn.com for purchasing issues.
We did contact XELTEK, they respond with us with direct contact.
Please contact,
Chen Zhiqiang
Xeltek Electronic Co., Ltd,
#1, Jiangyun Rd.,
Jiangning, Nanjing, P.R.China , ZIP 211111
+86-25-68161208
info@xeltek-cn.com
www.xeltek-cn.com/en/
Please contact bjs@xeltek-cn.com for any technical questions and zjb@xeltek-cn.com for purchasing issues.
Oct 03, 2021
08:23 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 03, 2021
08:23 PM
Inquire directly with Xeltek. They definitely know the IMC102T-F046 and will include support for this part.
Please visit our sites also: https://www.cantonheatingcooling.com/ : https://www.cantonjunkremoval.com/ : http://www.cantonpaving.com/ : https://www.cantonmiroofing.com/ : http://www.snowremovalcanton.com/ : https://www.cantonwaterheaterservice.com/
Please visit our sites also: https://www.cantonheatingcooling.com/ : https://www.cantonjunkremoval.com/ : http://www.cantonpaving.com/ : https://www.cantonmiroofing.com/ : http://www.snowremovalcanton.com/ : https://www.cantonwaterheaterservice.com/