infineon4engi@twitter infineon4engineers infineon@linkedin infineon@youtube
twitter Facebook Linkedin Youtube

Banner_DigitalMotorController Banner_IMM100_Series Banner_IMC100Series Banner_IRMCSeries Banner_iMotionApplicationKit


+ Reply to Thread
Results 1 to 9 of 9

Thread: IMC102T-F064: Gang programmer?

  1. #1
    Beginner Beginner arnaud is on a distinguished road
    Join Date
    Aug 2020
    Posts
    21
    Points
    170

    IMC102T-F064: Gang programmer?

    Hello

    I will start to evaluate the IMC102T-F064 with the evaluation boar which include a Seeger debbuger to communicate between IMC102T-F064 UART0 and PC via USB.
    This is ok in engineer office to play with the eval board, and then on our future specific hardware board by buy the specific Imotion-Link (https://www.infineon.com/cms/en/prod.../imotion-link/)

    But after that, in manufacturer phase, when we will produce over 1000pcs, is existing "Gang programmer" which allow to programme "Firmware + Parameters + Script" with a standalone "box" which will program device with a "press button" without need have a computer with IMotion Tool and the IMotion-Link and then flash?

    Else, is the MCUDesigner Tool, used to programme "Firmware + Parameters + Script" could be use into "Command line" mode?

    Thank

  2. #2
    Beginner Beginner arnaud is on a distinguished road
    Join Date
    Aug 2020
    Posts
    21
    Points
    170
    Hello
    Do not response yet from my request since many days.

    These points are critical to start our project with this product or not.
    It is the bigest project we had, our quantity will be about 4000pcs/years…
    May be a small quantity for you…

    Please, take time to respond to my request.
    Also request done by technical support without any success.

    Thank
    Regards

  3. #3
    Beginner Beginner
    Infineon Employee
    Infineon Employee
    daanish is on a distinguished road
    Join Date
    Nov 2019
    Posts
    17
    Points
    380
    Hello,
    A gang programmer is available from an external company Xeltek. Please find their information below.

    Xeltek Co.,Ltd
    http://www.xeltek.com.cn

    Online (SUPERPRO IS416) and offline (SUPERPRO 7500) solutions are available for the IMC102T-F064.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  4. #4
    Beginner Beginner arnaud is on a distinguished road
    Join Date
    Aug 2020
    Posts
    21
    Points
    170
    Hello,

    The SUPERPRO IS416 seems good, but the IMC10T-F064 not appears on the devices list:
    MICROCONTROLLER

    IMM101T-046M@QFN12x12 [FX-ISP1005], IMM101T-056M@QFN12x12 [FX-ISP1005],
    IMM102T-015M@QFN12x12 [FX-ISP1005], IMM102T-046M@QFN12x12 [FX-ISP1005],
    IMM102T-056M@QFN12x12 [FX-ISP1005], IMM101T-015M@QFN12x12 [FX-ISP1005],
    SAF-XC822-1FRA@ISP [FX-ISP1004], SAF-XC822-1FRI@ISP [FX-ISP1004],
    SAF-XC822M-1FRA@ISP [FX-ISP1004], SAF-XC822M-1FRI@ISP [FX-ISP1004],
    SAF-XC822MT-1FRA@ISP [FX-ISP1004], SAF-XC822MT-1FRI@ISP [FX-ISP1004],
    SAF-XC822T-0FRA@ISP [FX-ISP1004], SAF-XC822T-0FRI@ISP [FX-ISP1004],
    SAF-XC822T-1FRA@ISP [FX-ISP1004], SAF-XC822T-1FRI@ISP [FX-ISP1004],
    SAF-XC824M-1FGA@ISP [FX-ISP1004], SAF-XC824M-1FGI@ISP [FX-ISP1004],
    SAF-XC824MT-1FGA@ISP [FX-ISP1004], SAF-XC824MT-1FGI@ISP [FX-ISP1004],
    SAF-XC835MT-2FRA@ISP [FX-ISP1004], SAF-XC835MT-2FRI@ISP [FX-ISP1004],
    SAF-XC836-2FRA@ISP [FX-ISP1004], SAF-XC836-2FRI@ISP [FX-ISP1004],
    SAF-XC836M-1FRA@ISP [FX-ISP1004], SAF-XC836M-1FRI@ISP [FX-ISP1004],
    SAF-XC836M-2FRA@ISP [FX-ISP1004], SAF-XC836M-2FRI@ISP [FX-ISP1004],
    SAF-XC836MT-2FRA@ISP [FX-ISP1004], SAF-XC836MT-2FRI@ISP [FX-ISP1004],
    SAF-XC836T-2FRA@ISP [FX-ISP1004], SAF-XC836T-2FRI@ISP [FX-ISP1004],
    SAK-XC824M-1FGA@ISP [FX-ISP1004], SAK-XC824M-1FGI@ISP [FX-ISP1004],
    SAX-XC824M-1FGA@ISP [FX-ISP1004], SAX-XC824M-1FGI@ISP [FX-ISP1004],
    SP40@SOIC8 [FX-ISP1004], TLE9842-2QX@QFN48 [IS416VLT],
    TLE9842-QX@QFN48 [IS416VLT], TLE9844-2QX@QFN48 [IS416VLT],
    TLE9867@QFN48 [FX-ISP1006], TLE9867_007@QFN48 [FX-ISP1007],
    XC2224-20F66L [FX-ISP1005], IMC300@QFP100 [FX-ISP1005],
    Is its list is not updated?

  5. #5
    Beginner Beginner
    Infineon Employee
    Infineon Employee
    daanish is on a distinguished road
    Join Date
    Nov 2019
    Posts
    17
    Points
    380
    Please inquire with Xeltek. They are familiar with the IMC102T-F046 and will include support for this part.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  6. #6
    Beginner Beginner arnaud is on a distinguished road
    Join Date
    Aug 2020
    Posts
    21
    Points
    170
    Ok, this is in progress on Xeltek

  7. #7
    Beginner Beginner arnaud is on a distinguished road
    Join Date
    Aug 2020
    Posts
    21
    Points
    170
    Hello
    This post just to inform Xeltek replys:

    - They support the IMC102T in Off-line mode for SUPERPRO/7500
    - They could support the IMC102T, but they need to develop the software in ISP mode for SUPERPRO/IS416

    - They can't provide isolated probes. We must make them ourself.
    - They did not indicate me the price for the SUPERPRO/IS416 despite several repeated requests.

    Is SUPERPRO/IS416 is the alone solution on the market to flash programming in situ the IMC102T for mass production?

    Regards,

  8. #8

    Infineon Employee
    Infineon Employee
    Expert
    Infineon Employee
    Infineon Employee
    snget2 is on a distinguished road
    Join Date
    Jul 2020
    Posts
    8
    Hello Arnaud,
    We will contact Xeltek for this issue you are facing.
    We will let you know later.
    Regard,
    Sid
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  9. #9

    Infineon Employee
    Infineon Employee
    Expert
    Infineon Employee
    Infineon Employee
    snget2 is on a distinguished road
    Join Date
    Jul 2020
    Posts
    8
    Hello arnaud,
    We did contact XELTEK, they respond with us with direct contact.

    Please contact,
    Chen Zhiqiang
    Xeltek Electronic Co., Ltd,
    #1, Jiangyun Rd.,
    Jiangning, Nanjing, P.R.China , ZIP 211111
    +86-25-68161208
    info@xeltek-cn.com
    www.xeltek-cn.com/en/

    Please contact bjs@xeltek-cn.com for any technical questions and zjb@xeltek-cn.com for purchasing issues.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.