infineon4engi@twitter infineon4engineers infineon@linkedin infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 1 of 1

Thread: BLDC FOC sensorless not working with my ECU based on TLE9877QXA40

  1. #1
    New Member New Member M_BENDR is on a distinguished road
    Join Date
    May 2020
    Posts
    8
    Points
    105

    BLDC FOC sensorless not working with my ECU based on TLE9877QXA40

    Hello,

    To drive my BLDC motor i'm using the Infineon BLDC FOC sensorless SW example for TLE9879 EVAL kit. it working well
    However when i use this SW with my own circuit (electronic control unit) based on TLE9877QXA40 IC i'm not able to spin the motor
    To configure the SW, i have used in keil µvision configuration wizard with config.icwp file of TLE9879 EVAL, i have just modify the target (TLE9877 instead of TLE9879)
    Please refer to the following schematics :
    Click image for larger version

Name:	mic.PNG
Views:	2
Size:	64.2 KB
ID:	5005
    Click image for larger version

Name:	power supply.png
Views:	3
Size:	48.5 KB
ID:	5004
    For current sensing, i have 10 mohm resistor instead of 5
    I don't know what is the main difference between my own circuit and the circuit of the TLE9879 EVAL kit
    What peripheral i have to modify the setting (AD2, BDRV ....etc)
    what is the good values or what is the registers to modify ?
    thanks in advance for your support
    ?????? ?????? MIC.PNG‎  

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.