Jul 10, 2020
09:25 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 10, 2020
09:25 AM
I am using the low side driver chip TLE9104SH for my company's project, the SPI is emulated by GPIO. While testing timing, the TLE9104SH no reply at all(always high, VDD is 5V, VIO is 3.3V).
The oscilloscope picture 1, yellow line is CS, pink line is MOSI, light blue line is CLK, the always high line is MISO.
Can any one provide demo code, right timing diagram, or application note about TLE9104SH?
The datasheet is too simple to solve or analyze the problem.
Thanks a lot.
The oscilloscope picture 1, yellow line is CS, pink line is MOSI, light blue line is CLK, the always high line is MISO.
Can any one provide demo code, right timing diagram, or application note about TLE9104SH?
The datasheet is too simple to solve or analyze the problem.
Thanks a lot.
Labels
- Labels:
-
ispn:19224:1:0
-
l1:144:1:0
-
l2:268:1:0
-
l3:271:1:0
6 Replies
Jul 10, 2020
03:19 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 10, 2020
03:19 PM
Hi,
As this is an automotive grade driver IC, kindly contact your regional Infineon team for direct support.
Thanks and regards,
Srivatsa
As this is an automotive grade driver IC, kindly contact your regional Infineon team for direct support.
Thanks and regards,
Srivatsa
Jul 10, 2020
04:55 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 10, 2020
04:55 PM
Hi,
Could you tell me how to contact regional Infineon team? Location: Shen Zhen, China
Could you tell me how to contact regional Infineon team? Location: Shen Zhen, China
Jul 13, 2020
11:25 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 13, 2020
11:25 AM
Hi,
Pls try with one of the below channels:
https://www.infineon.com/cms/en/about-infineon/company/contacts/product-support-form/?redirId=56193
Live Chat @ https://www.infineon.com/cms/en/about-infineon/company/contacts/support/
I have also moved your thread to another forum to help get more visiblity.
Thanks and regards,
Srivatsa
Pls try with one of the below channels:
https://www.infineon.com/cms/en/about-infineon/company/contacts/product-support-form/?redirId=56193
Live Chat @ https://www.infineon.com/cms/en/about-infineon/company/contacts/support/
I have also moved your thread to another forum to help get more visiblity.
Thanks and regards,
Srivatsa
Jun 24, 2021
11:39 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 24, 2021
11:39 PM
Hi Team,
Any application notes for TLE9104 available ? ; I have the switch used in my design task. The MISO valid time seems to be 2.4 us which fails against the datasheet value
Any application notes for TLE9104 available ? ; I have the switch used in my design task. The MISO valid time seems to be 2.4 us which fails against the datasheet value
Jun 24, 2021
11:47 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 24, 2021
11:47 PM
Hi Team,
Any application notes for TLE9104 available ? ; I have the switch used in my design task. The MISO valid time seems to be 2.4 us which fails against the datasheet value
Also please confirm on the read frame in datasheet;
We write on MOSI & validated MOSI in SPI analyser
but when I give a read command using MOSI to read the config register, we are unable to get the set register value in MISO. Any suggestion would help.
Any application notes for TLE9104 available ? ; I have the switch used in my design task. The MISO valid time seems to be 2.4 us which fails against the datasheet value
Also please confirm on the read frame in datasheet;
We write on MOSI & validated MOSI in SPI analyser
but when I give a read command using MOSI to read the config register, we are unable to get the set register value in MISO. Any suggestion would help.
Feb 12, 2022
05:04 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 12, 2022
05:04 AM