-
Jun 16th, 2020 11:31 PM
#1
New Member
memtool programming - change COM setting programatically
hi all,
im making an automatically programming procedure, that so far works well with the memtool 4.3.
i did an .mtb file and via batch script i open the memtool with this mtb file and it programs my "SAK-XE164FN-24F80L".
the .mtb file goes like this:
connect
open_file "<path>.hex"
select_all_sections
add_selected_sections
program
disconnect
exit
my question is, can i programatically tell by which com port to program the device?
i dont want the user to interact with the GUI (Target->Setup-> select com port ) since the com port my change from time to time...
or, is there other way to program the MCU with other scripts/softwares?
Disclaimer
All content and materials on this site are provided “as is“. Infineon makes no warranties or
representations with regard to this content and these materials of any kind, whether express or
implied, including without limitation, warranties or representations of merchantability, fitness for
a particular purpose, title and non-infringement of any third party intellectual property right. No
license, whether express or implied, is granted by Infineon. Use of the information on this site may
require a license from a third party, or a license from Infineon.
Infineon accepts no liability for the content and materials on this site being accurate, complete or up-
to-date or for the contents of external links. Infineon distances itself expressly from the contents of
the linked pages, over the structure of which Infineon has no control.
Content on this site may contain or be subject to specific guidelines or limitations on use. All postings
and use of the content on this site are subject to the Usage Terms of the site; third parties using
this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of
this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements,
improvements and other changes to the content and materials, its products, programs and services
at any time or to move or discontinue any content, products, programs, or services without notice.
Reply With Quote
Bookmarks