infineon4engi@twitter infineon4engineers infineon@linkedin infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: XMC1300 ADC Boundary usage question

  1. #1
    New Member New Member seiferj is on a distinguished road
    Join Date
    Jun 2020
    Posts
    2
    Points
    35

    XMC1300 ADC Boundary usage question

    Inherited a started piece of software for XMC1300. ADC channels were set up to default to 12 bit left justified. When trying to use a boundary flag should the boundary condition itself also be left justified or will the processor do the comparison on the 12 bit ADC result and the low 12 bits of the boundary register?

  2. #2
    New Member New Member seiferj is on a distinguished road
    Join Date
    Jun 2020
    Posts
    2
    Points
    35
    Never mind. Reading manual closer, only the lower bit count conversion on left justified to bit 11.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.