Jun 02, 2020
03:00 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 02, 2020
03:00 AM
In TLE9879x in BLDC_Sensorless_FOC example how to measure voltage of motor.
Also can anyone explain how phase current is calculate in this example
Also can anyone explain how phase current is calculate in this example
Labels
1 Reply
Jun 16, 2020
04:57 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 16, 2020
04:57 AM
Hi! I this Appnote can answer your questions:
https://www.infineon.com/dgdl/Infineon-TLE987x-Sensorless-Field-Oriented-Control-ApplicationNotes-v0...
To measure the phase voltage you can directly apply an oscilloscope probe to each phase terminal of the motor, all referred to the ground terminal of your application.
https://www.infineon.com/dgdl/Infineon-TLE987x-Sensorless-Field-Oriented-Control-ApplicationNotes-v0...
To measure the phase voltage you can directly apply an oscilloscope probe to each phase terminal of the motor, all referred to the ground terminal of your application.