What is the source for TRAP2 bit in TRAPSTAT register in AURIX 2G?

[User9635]

Hello Support,
Shown below is a snippet from TRAPSTAT register Bit 2 .
Can you please tell me what is the source for this TRAP2?
What configuration does set this Bit TRAP2?
Please provide some section number from the User Manual where TRAP2 is described.


Best Regards

[Darren_Galpin]

That is set from TRAPSET.TRAP2. Writing 1 to TRAPSET.TRAP2 sets TRAPSTAT.TRAP2 to 1.

[User9635]

Hello Support,

So when software triggers TRAPSET.TRAP2, then it is not a CPU Trap generation I suppose.
If not, then which SMU Alarm Signal will be activated?
If it is a CPU Core Trap, then what is Trap Vector Number and what is the expected value of D15 Register [TIN] upon entering CPU Trap Vector.
Best Regards

[Darren_Galpin]

I believe that this causes an NMI trap (non-maskable interrupt), so TIN=0, class=7 (so CPU core trap).

[FD_aurix]

Hi all

so this is only activable via SW. Or it might be related to some HW pins as ESR0/ESR1?

[MoD]

It is only activatable via SW.