Hello everyone,
I have a hard time understanding how to control the phase shift for example to 120° between ccu80 80 ccu80 81 and ccu80 82. Is it something to do with the compare value being set to say 30% , 60 % and 80%
as seen in this document
https://www.infineon.com/dgdl/Infineon-CCU8-XMC1000_XMC4000-AP32288-AN-v01_01-EN.pdf?fileId=5546d462... page 20?
There is an example in the Matlab XMC Library for Embedded Coder; the example is called "XMC4400 Example: PMSM FOC Motor Control". The CCU80 configuration in said model doesn't use any "compare channel value" for CCU80 81and CCU80 82,
whereas CCU80 80 is set to channel 2 value 59.
Thanks in advance!
🙂
