infineon4engi@twitter infineon4engineers infineon@linkedin infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 3 of 3

Thread: XMC Debug LED blinking

  1. #1
    New Member New Member JJ67 is on a distinguished road
    Join Date
    Apr 2020
    Posts
    1
    Points
    15

    XMC Debug LED blinking

    Hey Guys,
    I just got my ordered xmc 4500 Relax Kit Lite.
    Unfortunately when I plug the board (both sides) into my laptop (Win10) the debug LED keeps blinking fast.
    The Power LED is normal. What does that mean?
    Dave Version 3.1.10 installed & JlinkARM_V484 installed as well.
    J-Link commander doesn‘t find the board as well. Already tried different micro usb cables.


    Do you guys have any idea about my problem?

    Thank you guys,
    Best regards
    JJ

  2. #2
    New Member New Member ermes is on a distinguished road
    Join Date
    Feb 2016
    Posts
    17
    Points
    100.625
    Have you solved your problem?
    I have the same issue with XMC4200 kit

  3. #3

    Infineon Employee
    Infineon Employee
    jferreira will become famous soon enough
    Join Date
    Oct 2012
    Posts
    775
    Hi,

    Can you try using only the USB debugger connector?
    You should see the Power and Debug LEDs on.
    Update JLink to latest version, i.e. v6.80b https://www.segger.com/downloads/jli...nk_Windows.exe
    Try now with JLink commander.
    You should see:

    Code:
    SEGGER J-Link Commander V6.80b (Compiled Jun  5 2020 17:41:24)
    DLL version V6.80b, compiled Jun  5 2020 17:40:22
    
    Connecting to J-Link via USB...O.K.
    Firmware: J-Link Lite-XMC4000 Rev.1 compiled Apr  2 2015 18:25:20
    Hardware version: V1.00
    S/N: 551017159
    VTref=3.300V
    
    
    Type "connect" to establish a target connection, '?' for help
    J-Link>connect
    Please specify device / core. <Default>: XMC4500-1024
    Type '?' for selection dialog
    Device>
    Please specify target interface:
      J) JTAG (Default)
      S) SWD
      T) cJTAG
    TIF>S
    Specify target interface speed [kHz]. <Default>: 4000 kHz
    Speed>
    Device "XMC4500-1024" selected.
    
    
    Connecting to target via SWD
    Performing XMC4500 connection sequence.
    Unknown DP version. Assuming DPv0
    Scanning AP map to find all available APs
    AP[1]: Stopped AP scan as end of AP map has been reached
    AP[0]: AHB-AP (IDR: 0x24770011)
    Iterating through AP map to find AHB-AP to use
    AP[0]: Core found
    AP[0]: AHB-AP ROM base: 0xE00FF000
    CPUID register: 0x410FC241. Implementer code: 0x41 (ARM)
    Found Cortex-M4 r0p1, Little endian.
    FPUnit: 6 code (BP) slots and 2 literal slots
    CoreSight components:
    ROMTbl[0] @ E00FF000
    ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB00C SCS-M7
    ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 003BB002 DWT
    ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 002BB003 FPB
    ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 003BB001 ITM
    ROMTbl[0][4]: E0040000, CID: B105900D, PID: 000BB9A1 TPIU
    ROMTbl[0][5]: E0041000, CID: B105900D, PID: 000BB925 ETM
    Cortex-M4 identified.
    J-Link>
    Regards,
    Jesus
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.