Apr 28, 2020
10:52 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 28, 2020
10:52 AM
Good time to all.
Please help me deal with the board.
There is an inverter board (pictures) assembled on the IRMCF341 controller, the IR2233J driver and the powerful 50 amp IGBT module FP50R12KT4G.
Under the controller there is a memory from a Microchip of 256 K.
The board has a UART port with optical isolation.
Can I configure engine parameters via the UART port or by flashing the EEPROM? How it's done?
And further.
I would be grateful if you indicate where I can get the table of engine control commands via the UART port.
Thanks for All!
Please help me deal with the board.
There is an inverter board (pictures) assembled on the IRMCF341 controller, the IR2233J driver and the powerful 50 amp IGBT module FP50R12KT4G.
Under the controller there is a memory from a Microchip of 256 K.
The board has a UART port with optical isolation.
Can I configure engine parameters via the UART port or by flashing the EEPROM? How it's done?
And further.
I would be grateful if you indicate where I can get the table of engine control commands via the UART port.
Thanks for All!
Labels
- Tags:
- IFX
1 Reply
Feb 26, 2021
11:35 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 26, 2021
11:35 AM
helo why is the memory under the microchip