XMC1302 and XMC1201 programming

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User19304
Level 2
Level 2
First solution authored
Hello; I am new to Infineon microcontrollers
I need to program XMC1302 and XMC1201 microcontrollers
I am having a hard time in finding the right information regarding programming of these two MCUs :

1. What programmer hardware should I use in order to download / programm a hex file into these two MCU's Flash memory ? I am looking for a low cost solution, something like an evaluation board.
2. What software should I use for just programming these MCUs using the proposed programming hardware ?

3. I have PE Micro Multilink Universal, which says it can programm XMCs, but I could not find a software for it (free of course) .


Can anyone help me with some ideas?
0 Likes
3 Replies
jferreira
Employee
Employee
10 sign-ins 5 sign-ins First like received
0 Likes
User19304
Level 2
Level 2
First solution authored
Hi
I have integrated PEmicro into Dave but under ""Select Device" I see nothing, the list is empty...

Anyway, what I really need is a programming software which must have a command line interface because I need to integrate this into my PC software, for automatic production programming

If I buy an XMC boot kit with the onboard debugger, Segger JLink software has a CLI ?
0 Likes
jferreira
Employee
Employee
10 sign-ins 5 sign-ins First like received
Hi,

Yes, the SEGGER JLink Commander can be scripted.

Regards,
Jesus
0 Likes