infineon4engi@twitter infineon@linkedin infineon4engineers infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 5 of 5

Thread: Sos smd

  1. #1
    Beginner Beginner Jakalfree is on a distinguished road
    Join Date
    Apr 2020
    Posts
    5
    Points
    60

    Sos smd

    Good evening everyone, I need a hand, because electronics is not really my work

    In the image that I attach (enlarged) there are resistors.

    2 of these are unsoldered and skipped!

    One is a 1211 (the bigger one) and you should be a 1210 ohm resistor right?

    The other smaller one missing, it was all black with no writing like the one between the two 104. How can I understand what it was? Please I need help ...
    the black resistor without writing, has one side that goes to the resistor 1211 which is missing, and the other side goes to a capacitor and then a piece of ground and to pin 1 of the sak-tc1766-192f80hl tricore microprocessor.
    I attach photos





  2. #2
    Beginner Beginner Jakalfree is on a distinguished road
    Join Date
    Apr 2020
    Posts
    5
    Points
    60




  3. #3
    Beginner Beginner Jakalfree is on a distinguished road
    Join Date
    Apr 2020
    Posts
    5
    Points
    60
    I've problem with MAF sensor

  4. #4
    Beginner Beginner Jakalfree is on a distinguished road
    Join Date
    Apr 2020
    Posts
    5
    Points
    60
    No one help me?

  5. #5
    Beginner Beginner Jakalfree is on a distinguished road
    Join Date
    Apr 2020
    Posts
    5
    Points
    60
    Dead or alive ??

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.