Banner_EconoPack-2_3-232x232 Banner_Easy_Power-Modules-232x232 Easy-with-Trenchstop-igbt7-232x232 Banner_Thermal-Interface-Material-232x232 Banner_IGBT-Modules_64_32_mm-232x232

+ Reply to Thread
Results 1 to 2 of 2

Thread: Soldering press fit pins for Econopack + modules

  1. #1
    Beginner Beginner TechGirl is on a distinguished road
    Join Date
    Aug 2019

    Soldering press fit pins for Econopack + modules

    Is it allowed to solder press fit pins for Econopack + modules?

  2. #2

    Infineon Employee
    Infineon Employee
    AlexG is on a distinguished road
    Join Date
    Jan 2020
    Hi TechGirl,

    Yes, after bolting down the PCB connection can be made by manual soldering, automatic selective soldering, or wave soldering.
    During the entire soldering process take care not to exceed the appropriate process parameters (soldering temperature and time of action at the control terminals) and thus not deform and damage the plastic housing.
    According to IEC 60068-2-20 the soldering temperature during the solder process should be T=(260±3)°C for a maximum time of action of tmax≤(10±1)s.

    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.