Soldering press fit pins for Econopack + modules

Announcements

From sunburn to sun earn – we’ve got the power! Watch our #poweringgreen videos now.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
TechGirl
Employee
Employee
5 questions asked First question asked
Is it allowed to solder press fit pins for Econopack + modules?
0 Likes
1 Solution
AlexG
Moderator
Moderator
Moderator
Welcome! 10 solutions authored 10 replies posted
Hi TechGirl,

Yes, after bolting down the PCB connection can be made by manual soldering, automatic selective soldering, or wave soldering.
During the entire soldering process take care not to exceed the appropriate process parameters (soldering temperature and time of action at the control terminals) and thus not deform and damage the plastic housing.
According to IEC 60068-2-20 the soldering temperature during the solder process should be T=(260±3)°C for a maximum time of action of tmax≤(10±1)s.

BR

View solution in original post

0 Likes
1 Reply
AlexG
Moderator
Moderator
Moderator
Welcome! 10 solutions authored 10 replies posted
Hi TechGirl,

Yes, after bolting down the PCB connection can be made by manual soldering, automatic selective soldering, or wave soldering.
During the entire soldering process take care not to exceed the appropriate process parameters (soldering temperature and time of action at the control terminals) and thus not deform and damage the plastic housing.
According to IEC 60068-2-20 the soldering temperature during the solder process should be T=(260±3)°C for a maximum time of action of tmax≤(10±1)s.

BR
0 Likes