Reading Data from PLC Over Ethernet MAC

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User19136
Level 1
Level 1
Hi,


We are using XMC4800_relax_kit to read the data from Allen Bradley Micro820 PLC which collects the data from sensors and stores in to holding registers and coils, we are able to read the data from PLC over Modbus, But if i want to read the data from PLC over Ethernet MAC how to read.

Allen Bradley Micro820 PLC supports Modbus and Ethernet IP.

Is there any example? if it is there please let me know.



Thanks & Regards,
Swamy.
0 Likes
3 Replies
jferreira
Employee
Employee
10 sign-ins 5 sign-ins First like received
Hi,

Check the Modbus examples in DAVE4 at https://www.infineon.com/cms/en/product/promopages/aim-mc/dave_downloads.html
4126.attach

Regards,
Jesus
0 Likes
User19136
Level 1
Level 1
Hi Jesus,

Thanks for the Response, I want to read the data using EtherNET MAC Address.

Is there any example code.


Regards,
Swamy.
0 Likes
User19136
Level 1
Level 1
Hi,

I got the drivers of the EtherNet MAC for oryx (https://www.oryx-embedded.com/doc/xmc4800__eth__driver_8c_source.html). are these drivers available for DAVE also?


Please let me know.


Regards,
Swamy
0 Likes