Mar 02, 2020
07:28 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 02, 2020
07:28 AM
Hi guys,
I am looking into a design using the Econodual3 with pressfit. What is the Infineon recommendation for a PCB that works well here?
Thanks in advance,
nick
I am looking into a design using the Econodual3 with pressfit. What is the Infineon recommendation for a PCB that works well here?
Thanks in advance,
nick
Solved! Go to Solution.
- Tags:
- IFX
1 Solution
Mar 06, 2020
04:48 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 06, 2020
04:48 AM
Hi Nick,
For the PCB we recommend first to take a look in the datasheet of the corresponding module.
There you can find the all needed dimensions.
Regarding the other relevant topics please have a look at the mounting instruction application note.
BR
For the PCB we recommend first to take a look in the datasheet of the corresponding module.
There you can find the all needed dimensions.
Regarding the other relevant topics please have a look at the mounting instruction application note.
BR
1 Reply
Mar 06, 2020
04:48 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 06, 2020
04:48 AM
Hi Nick,
For the PCB we recommend first to take a look in the datasheet of the corresponding module.
There you can find the all needed dimensions.
Regarding the other relevant topics please have a look at the mounting instruction application note.
BR
For the PCB we recommend first to take a look in the datasheet of the corresponding module.
There you can find the all needed dimensions.
Regarding the other relevant topics please have a look at the mounting instruction application note.
BR