infineon4engi@twitter infineon4engineers infineon@linkedin infineon@youtube
twitter Facebook Linkedin Youtube

Banner_Gate_Driver Banner_Isolated_GateDriver Banner_SOI_Gate_Driver Banner_Low_Side_Gate_Driver Banner_Solutions_for_Gate_Driver_and_power_switches


+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: IR2136 application circuit

  1. #11
    Moderator
    Infineon Employee
    Infineon Employee
    Expert
    Srivatsa is on a distinguished road
    Join Date
    Apr 2018
    Location
    California
    Posts
    53
    For reducing the current spikes, you can check your layout. See an optimal layout example as attached. Use dedicated traces right from the shunt resistor to the resistors of
    amplifier. Traces must not be shared with ground planes. Keep traces among MOSFETs and DC bus capacitors as short as possible.

    You can also try with a bigger Vcc capacitor.

    Click image for larger version

Name:	Layout.png
Views:	3
Size:	85.5 KB
ID:	4540
    More information can be found under www.infineon.com/gatedriver
    Please contact our Technical Assistance Center for further inquiries

  2. #12
    Beginner Beginner marcuccio1995 is on a distinguished road
    Join Date
    Feb 2020
    Posts
    10
    Points
    52.5
    Hi, I have determined the values of my components but I'm not sure that the calculation is good.

    Can someone check my calculations please ?

    bootstrap capacitor : 47nF

    bootstrap diode : BA218

    bootstrap resistance : 100 ohms

    Click image for larger version

Name:	calculation.jpg
Views:	1
Size:	206.9 KB
ID:	4703

    and the documents of the calculations :

    http://www.ti.com/lit/an/slua887/slu...=1588775387752

    https://www.infineon.com/dgdl/Infine...585242c11947b1
    Last edited by marcuccio1995; May 6th, 2020 at 08:31 AM. Reason: addition information

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.