infineon4engi@twitter infineon@linkedin infineon4engineers infineon@youtube
twitter Facebook Linkedin Youtube

Banner_AURIX_Security-Solution Banner_AURIX_Safety_Products ShieldBuddy TC275 Banner_AURIX_OnzerOS Banner_AURIX_DevelopmentStudio


+ Reply to Thread
Results 1 to 2 of 2

Thread: HW registers that can be written during bootloader and available at Application Run

  1. #1
    New Member New Member Abhi_run is on a distinguished road
    Join Date
    Feb 2020
    Posts
    1
    Points
    30

    HW registers that can be written during bootloader and available at Application Run

    Hello Developers

    I am using Aurix TC27xx and I need to identify connected peripheral with a HW instance ID during bootloader mode . I am planning to read few ADC pins (P00.8, P00.9 , P00.10) and using multiplex feature (combination table) can assign a HW instance ID to a combination of ADC voltages with code written in bootloader..

    I need to save this HW instance ID to a register or EEPROM block . This HW instance ID will be assigned to a CAN ID which can be used by application sw to run targeted SW and understand specific CAN signal coming from each connected peripheral easily.

    What kind of register I should use which can be used in bootloader mode and can be available to APPSW .

    Requirements:
    1.) register should get updated with new data at each PowerOnReset in BOOT mode.
    2.) Accessible to Application SW at normal start.
    3.) possible error detection at BIT level for these registers


    Regards
    Abhi

  2. #2
    Advanced Advanced cwunder is on a distinguished road
    Join Date
    Feb 2015
    Location
    USA
    Posts
    153
    Points
    2997.5
    If you can use a register does this post help you?
    https://www.infineonforums.com/threa...rforming-Reset

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.