Feb 10, 2020
04:20 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 10, 2020
04:20 PM
Hello,
I would like to make people/object detection system for a vehicle.
Idea is to detects people when the vehicle is going in reverse.
That means vehicle is going to be relatively slowly.
I have demo position2go kit, but I can't seem to configure it to detect reliably.
Sometimes it detects when nothing is there and sometimes it doesn't detect when there is a obstacle/people there.
Is this demo kit capable of reliable detection? Do I just need to better configure it or is there a better solution there?
Please help me, I'm willing to compensate you for your help.
Thanks for any reply in advance.
I would like to make people/object detection system for a vehicle.
Idea is to detects people when the vehicle is going in reverse.
That means vehicle is going to be relatively slowly.
I have demo position2go kit, but I can't seem to configure it to detect reliably.
Sometimes it detects when nothing is there and sometimes it doesn't detect when there is a obstacle/people there.
Is this demo kit capable of reliable detection? Do I just need to better configure it or is there a better solution there?
Please help me, I'm willing to compensate you for your help.
Thanks for any reply in advance.
3 Replies
Feb 17, 2020
12:45 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 17, 2020
12:45 PM
I would really appreciate any help
Nov 18, 2022
10:46 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 18, 2022
10:46 PM
Hi, Hope you are doing well. Have you resolved your issue?
I am facing the same issue and need some help.
Nov 20, 2022
08:16 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 20, 2022
08:16 PM
Hi @hasanqureshi110 ,
Position2Go Board is very well capable of reliable detection but you'll need to tune it from your side accordingly. Please create a new query if you still face issues after tuning it.
Also, Please note that the support for P2Go is limited as it is soon to be discontinued. Please refer : https://community.infineon.com/t5/Radar-sensor/Discontinued-Products-XENSIV-Radar-mmWave-24GHz-DEMO-...
You can always go with one of our newer boards according to your application : Distance2GoL or Sense2GoL Pulse.
Best regards,
Deepa