+ Reply to Thread
Results 1 to 2 of 2

Thread: DAVE_Init() does not finish when Pin App Method is used

  1. #1
    Beginner Beginner Markus S. is on a distinguished road
    Join Date
    Jan 2020
    Location
    Switzerland
    Posts
    6
    Points
    70

    DAVE_Init() does not finish when Pin App Method is used

    Hi,

    I have startet a Project on the XMC2Go Baord that for now uses the DAVE-Apps PWM and ADC. The files are in the Attachement.
    The observation is now that
    - PWM starts normally (seen on Output Pin P0.7) if I comment out line 45 in main.c.
    - Program does NOT finish the step "status=DAVE_Init();" if this line is not commentet out. No PWM-Signal on Pin 0.7.

    But line 45 reads only " DIGITAL_IO_SetOutputLow(&DIGITAL_IO_0);". It has no connection to the PWM.

    Why is that?
    ?????

  2. #2

    Infineon Employee
    Infineon Employee
    jferreira will become famous soon enough
    Join Date
    Oct 2012
    Posts
    689
    Hi,

    The ADC is configured in continuous conversion mode and start conversion after initialization. My assumption is that your are not leaving the interrupt context when the next conversion interrupt is already pending if you keep the mentioned line uncommented.
    You can alternatively deselect the start conversion after initialization and after the call to start the PWM, i.e. PWM_CCU4_Start(&PWM_CCU4_0);, you do ADC_MEASUREMENT_StartConversion(&ADC_MEASUREMENT_0 );

    Regards,
    Jesus
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.