+ Reply to Thread
Results 1 to 8 of 8

Thread: Read Data from TLV493D 3D magnetic sensor

  1. #1
    Beginner Beginner ashokr is on a distinguished road
    Join Date
    Feb 2020
    Posts
    1
    Points
    65

    Read Data from TLV493D 3D magnetic sensor

    Hi All,

    Im having the board https://www.infineon.com/cms/en/prod...3d-a1b6-ms2go/
    trying to read data from different MCU's.
    I downloaded the example code and , ported to my micro (cortex m4) with I2C driver implementation.

    I2C with 400K bps,

    PIN 1 - Used for Powering the Sensor
    PIN 2 - SCL
    PIN 3 - SDA

    I initialized the sensor , with SCL, SDA as LOW while power up and sends I2C read commands , with slave address as 0x35
    getting response as All 0XFF .
    Also i looked these arduino driver examples -> https://github.com/Infineon/TLV493D-...rc/Tlv493d.cpp
    Tried all way but i gets only 0xFF all the time.

    Thanks
    Ashok R

  2. #2
    New Member New Member Afnan is on a distinguished road
    Join Date
    Nov 2020
    Posts
    1
    Points
    20
    Hi Ashok,

    Were you able to solve this issue? I have bought the same sensors with no luck.

    Regards

    Afnan

  3. #3
    New Member New Member vicenzomorett1s is on a distinguished road
    Join Date
    Jan 2021
    Posts
    1
    Points
    20
    You are amazing dude, you save my life.

    https://www.lawnsiouxfalls.com/

  4. #4
    New Member New Member zaneroundtree is on a distinguished road
    Join Date
    Mar 2021
    Posts
    1
    Points
    20
    I'm interested in getting a few of these evaluation kits set.
    https://www.sandblastingdallastx.com/services/

  5. #5
    New Member New Member clarencesparrow is on a distinguished road
    Join Date
    May 2021
    Posts
    1
    Points
    20
    I have this and the only problem is no battery will even last 100 years.
    https://cleaningservicesschaumburg.com/

  6. #6
    New Member New Member randycrouse is on a distinguished road
    Join Date
    Jun 2021
    Posts
    1
    Points
    20
    awesome for joystick applications if you get your magnetics tweaked to suit
    https://www.hydroseedingprosri.com/

  7. #7
    New Member New Member BrionBaldwin is on a distinguished road
    Join Date
    Jun 2021
    Posts
    1
    Points
    40
    You are so kind to share the code.

    Ohio Signature Painting

  8. #8

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.