Feb 04, 2020
03:27 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 04, 2020
03:27 AM
Hi All,
Im having the board https://www.infineon.com/cms/en/product/evaluation-boards/tlv493d-a1b6-ms2go/
trying to read data from different MCU's.
I downloaded the example code and , ported to my micro (cortex m4) with I2C driver implementation.
I2C with 400K bps,
PIN 1 - Used for Powering the Sensor
PIN 2 - SCL
PIN 3 - SDA
I initialized the sensor , with SCL, SDA as LOW while power up and sends I2C read commands , with slave address as 0x35
getting response as All 0XFF .
Also i looked these arduino driver examples -> https://github.com/Infineon/TLV493D-A1B6-3DMagnetic-Sensor/blob/master/src/Tlv493d.cpp
Tried all way but i gets only 0xFF all the time.
Thanks
Ashok R
Im having the board https://www.infineon.com/cms/en/product/evaluation-boards/tlv493d-a1b6-ms2go/
trying to read data from different MCU's.
I downloaded the example code and , ported to my micro (cortex m4) with I2C driver implementation.
I2C with 400K bps,
PIN 1 - Used for Powering the Sensor
PIN 2 - SCL
PIN 3 - SDA
I initialized the sensor , with SCL, SDA as LOW while power up and sends I2C read commands , with slave address as 0x35
getting response as All 0XFF .
Also i looked these arduino driver examples -> https://github.com/Infineon/TLV493D-A1B6-3DMagnetic-Sensor/blob/master/src/Tlv493d.cpp
Tried all way but i gets only 0xFF all the time.
Thanks
Ashok R
15 Replies
Nov 13, 2020
03:35 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 13, 2020
03:35 PM
Hi Ashok,
Were you able to solve this issue? I have bought the same sensors with no luck.
Regards
Afnan
Were you able to solve this issue? I have bought the same sensors with no luck.
Regards
Afnan
Jan 06, 2021
06:08 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 06, 2021
06:08 AM
Mar 17, 2021
12:41 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 17, 2021
12:41 AM
I'm interested in getting a few of these evaluation kits set.
https://www.sandblastingdallastx.com/services/
https://www.sandblastingdallastx.com/services/
May 11, 2021
10:38 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 11, 2021
10:38 PM
I have this and the only problem is no battery will even last 100 years.
https://cleaningservicesschaumburg.com/
https://cleaningservicesschaumburg.com/
Jun 03, 2021
08:27 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 03, 2021
08:27 AM
awesome for joystick applications if you get your magnetics tweaked to suit
https://www.hydroseedingprosri.com/
https://www.hydroseedingprosri.com/
Jun 22, 2021
06:41 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 22, 2021
06:41 AM
Jun 23, 2021
04:50 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 23, 2021
04:50 AM
construction accident lawyer finger lakes realty partners
Hope you're able to fix yours.
https://www.bootsandbeauty.com
Hope you're able to fix yours.
https://www.bootsandbeauty.com
Aug 25, 2021
03:34 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 25, 2021
03:34 AM
I hope the issue has been solved. I have had the same problem previously.
Aug 31, 2021
06:55 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 31, 2021
06:55 PM
Sep 07, 2021
03:52 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 07, 2021
03:52 AM
I haven't had this problem before but I am interested if this has been solved.
Sep 14, 2021
04:50 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 14, 2021
04:50 AM
I have the same sensor as yours, I am not sure if there is something that you can figure out when installing it on the board.
Sep 22, 2021
06:16 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 22, 2021
06:16 AM
Hmm, I am looking into it. Very interesting!
Sep 28, 2021
12:06 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 28, 2021
12:06 AM
Oct 02, 2021
06:17 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 02, 2021
06:17 AM
Oct 20, 2021
10:37 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 20, 2021
10:37 PM